PortaPint 70C Drinks Dispenser – Twin Tap Portable Draught Beer Cooler
The PortaPint 70C Drinks Dispenser is a high-capacity twin-tap portable draught beer cooler with a built-in air compressor, designed for events, mobile bars, parties and temporary drinks dispense.
Capable of cooling and dispensing up to 80 litres per hour – approximately 140 pints – the PortaPint 70C provides the capacity required for busier bars and events while retaining a compact, self-contained design.
The dry cooling system requires no water bath or ice bank, while the two dispense taps allow two compatible kegged products to be served from the same machine.
PortaPint 70C Twin Tap Beer Dispenser
The PortaPint 70C combines a high-capacity dry cooler, two compensator beer taps and an integrated air compressor within one portable unit.
It is suitable for serving compatible draught:
- Beer
- Cider
- Kegged drinks
- KeyKeg products
- Other compatible beverages
Two independent taps allow different products to be connected and served at the same time.
Key Features
- PortaPint 70C Drinks Dispenser
- Twin-tap configuration
- 80 L/hour maximum output
- Approximately 140 pints per hour
- Built-in air compressor
- Dry cooling technology
- No water bath required
- Twin compensator taps
- Adjustable flow control
- Removable drip tray
- Compact portable design
- R290 refrigerant
- Suitable for events and mobile bars
Up to 80 Litres / 140 Pints Per Hour
The PortaPint 70C has a maximum rated output of:
- 80 litres per hour
- Approximately 140 pints per hour
This makes it suitable for higher-volume applications where smaller portable beer dispensers may not provide sufficient cooling capacity.
Actual performance will depend on incoming product temperature, required serving temperature, ambient conditions and the pattern of dispense.
Built-In Air Compressor
The integrated air compressor provides dispense pressure where compressed air is suitable for the keg system being used.
This can remove the need for a separate external compressor and is particularly useful with KeyKeg and compatible bag-type keg systems, where the driving air remains separated from the beverage.
Using the PortaPint 70C with KeyKegs
The PortaPint 70C is particularly well suited to KeyKeg dispense.
With a KeyKeg, compressed air is applied outside the internal product bag rather than coming into direct contact with the beverage.
This allows the PortaPint's built-in compressor to provide the driving pressure without introducing compressed air directly into the drink.
The actual usable life of an opened KeyKeg will depend on the beverage, storage conditions and manufacturer's recommendations.
Using Steel Kegs
The built-in air compressor can be used with compatible conventional steel kegs for short-term dispense, such as parties and events where the keg will be consumed quickly.
With a conventional steel keg, however, compressed air comes into contact with the beverage and introduces oxygen.
For longer-term connection, use the correct CO2 or mixed beverage gas recommended by the brewery or beverage supplier rather than compressed air.
Dry Cooling Technology
The PortaPint 70C uses dry cooling technology, meaning there is no water tank to fill or ice bank to build before operation.
Product is chilled as it passes through the internal cooling system before reaching the dispense taps.
This makes the machine particularly suitable for portable and temporary applications where straightforward setup and pack-down are important.
Twin Compensator Taps
Two compensator taps provide independent dispense points with adjustable flow control.
The flow rate can be adjusted at each tap to suit the connected product and dispense setup.
Correct product temperature, pressure and beer line configuration are still important for achieving a properly balanced draught system.
Suitable For
The PortaPint 70C is ideal for:
- Mobile bars
- Weddings
- Parties
- Festivals
- Sporting events
- Corporate events
- Brewery taprooms
- Pop-up bars
- Beer festivals
- Temporary draught bars
- Event hire
- Home bars requiring higher capacity
Supplied With
The PortaPint 70C includes:
- PortaPint 70C cooling unit
- Two compensator taps
- Built-in air compressor
- Drip tray
- Operating instructions
Keg couplers, product pipe, gas or air pipe, regulators and other connecting equipment are not included unless specifically stated.
Technical Specifications
- Model: PortaPint 70C
- Number of Taps: 2
- Maximum Output: 80 L/hour
- Approximate Pint Capacity: 140 pints/hour
- Cooling Type: Dry cooling
- Air Compressor: Built in
- Voltage: 220–240V
- Frequency: 50Hz
- Running Current: 2.5A
- Refrigerant: R290
- Net Weight: 31.3kg
- Height: 455mm
- Width: 245mm
- Length: 485mm
- Length Including Drip Tray: 520mm
What Else Will I Need?
The equipment required will depend on the keg being connected and may include:
- Correct keg coupler
- Beer or product pipe
- Air or gas pipe
- Push-fit fittings
- CO2 or mixed gas regulator where bottled gas is required
Always check the keg valve type, required dispense method and recommended pressure before selecting your connecting equipment.
Important
The built-in compressor supplies compressed air, not CO2 or mixed beverage gas.
Compressed air is particularly useful with KeyKegs and compatible bag-type systems. When using conventional steel kegs, consider how quickly the product will be consumed and use the brewery's recommended beverage gas for longer-term dispense.
