Lindr 40K Profi Draught Dispenser – Twin Tap Cooler with Adjustable Air Compressor
The Lindr 40K Profi Draught Dispenser is a compact twin-tap dry beer cooler with an integrated adjustable air compressor and pressure gauge, designed for professional, mobile and temporary draught drinks dispense.
Offering approximately 35–40 litres per hour continuous cooling capacity and up to 50 litres per hour maximum output, the Lindr 40K Profi can serve two compatible draught products from a single portable dispenser.
The Profi pressure control system allows the output pressure from the built-in compressor to be adjusted to suit compatible keg systems, making it particularly useful for KeyKeg and other bag-type keg dispense.
Lindr 40K Profi Twin Tap Beer Dispenser
The Lindr 40K Profi combines the beer cooler, two dispense taps and adjustable air compressor within one compact unit.
Two product lines can be connected, allowing different compatible drinks to be served independently from each tap.
Suitable products can include:
- Draught beer
- Cider
- Kegged wine
- Pre-mixed cocktails
- Other compatible kegged drinks
Profi Adjustable Pressure System
The main advantage of the Lindr 40K Profi is its adjustable compressor pressure system.
The integrated Profi pressure gauge and regulator allow the compressor output pressure to be monitored and adjusted to suit the dispense requirements of compatible keg systems.
This provides greater control than a basic fixed-pressure compressor system and is particularly useful when dispensing different products or using different keg formats.
Key Features
- Lindr 40K Profi Draught Dispenser
- Twin-tap design
- Serves up to two products
- 35–40 L/hour continuous cooling capacity
- Maximum output up to 50 L/hour
- Built-in air compressor
- Adjustable Profi pressure control
- Integrated pressure gauge
- Dry cooling technology
- Adjustable thermostat
- Twin compensator beer taps
- Individual flow control at the taps
- Integrated carrying handles
- Stable rubber feet
- Compact countertop design
- Suitable for mobile and temporary draught dispense
Built-In Adjustable Air Compressor
The integrated compressor can provide the driving pressure for compatible keg systems without requiring a separate external air compressor.
It is particularly suitable for KeyKeg and compatible bag-type keg systems, where the compressed driving air remains separated from the beverage.
The Profi system allows the compressor output to be adjusted rather than relying on a fixed pressure.
Important – Air vs Beverage Gas
The built-in compressor produces compressed air. This should not be confused with CO2, nitrogen or mixed beverage gas.
For conventional steel beer kegs, the correct CO2 or mixed gas system may still be required.
Always follow the brewery or beverage manufacturer's recommendations for the correct dispense gas and operating pressure.
Dry Cooling System
The Lindr 40K Profi uses dry cooling technology, so there is no water bath to fill and no ice bank to build before use.
The beverage passes through the internal cooling system before reaching the taps, making the unit well suited to portable installations where quick setup and pack-down are important.
Cooling Capacity
The Lindr 40K Profi provides approximately:
- Continuous Cooling Capacity: 35–40 L/hour
- Maximum Output: Up to 50 L/hour
Actual performance depends on incoming beverage temperature, selected serving temperature, dispense rate and ambient conditions.
Twin Compensator Taps
Two compensator taps provide independent dispense points and adjustable flow control.
This allows the pour rate to be adjusted at each tap to suit the connected product and dispense setup.
Correct product temperature, keg pressure and beer line configuration are still required for a properly balanced draught system.
Temperature Control
An adjustable thermostat provides control over the cooling system, allowing the dispenser to be configured for different compatible drinks and operating conditions.
Portable Design
Integrated carrying handles make the Lindr 40K Profi suitable for applications where the dispenser needs to be regularly transported and installed.
Typical applications include:
- Mobile bars
- Weddings
- Parties
- Festivals
- Corporate events
- Brewery taprooms
- Pop-up bars
- Hospitality events
- Home bars
- Temporary draught installations
Suitable Keg Systems
The Lindr 40K Profi can be incorporated into dispense systems using compatible:
- KeyKegs
- Bag-type Polykegs
- Other compatible bag-in-keg systems
- Conventional steel kegs when used with the correct external beverage gas equipment
The required coupler, pressure and dispense method will depend on the individual keg.
What Else Will I Need?
Depending on the keg system, additional equipment may include:
- Appropriate keg couplers
- Beer or product pipe
- Air or gas pipe
- Push-fit fittings
- External CO2 or mixed gas regulator where required
Always check the keg connection and recommended dispense pressure before selecting the associated equipment.
Lindr 40K vs Lindr 40K Profi
The 40K Profi is designed for applications where adjustable compressor pressure is required.
Its integrated Profi pressure control and gauge allow the compressed air output to be adjusted to suit compatible keg systems rather than relying on a basic compressor arrangement.
This makes the Profi model particularly useful for professional mobile dispense installations using different products and keg formats.
EASY TO CARRY
Easy and safe handling thanks to the small dimensions of the machine and the handles which are located on its upper part.
SPECIAL SUPPORT
Rubber support for perfect stability and adhesion to any surface.
TEMPERATURE CONTROL
The standard supplied part is a thermostat enabling continuous and precise regulation of the beverage temperature.
