Lindr 155K Draught Beer Dispenser – High Capacity Twin Tap Beer Cooler
The Lindr 155K Draught Beer Dispenser is a high-capacity twin-tap dry beer cooler with an integrated air compressor, designed for events, mobile bars and other high-volume draught drinks applications.
With a maximum cooling and dispense capacity of up to 180 litres per hour, the Lindr 155K provides considerably greater output than smaller portable Lindr dispensers while retaining the convenience of a self-contained dry cooling system.
Two dispense taps allow two compatible draught products to be connected and served from the same machine.
Lindr 155K High Capacity Beer Dispenser
The Lindr 155K is designed for applications where a compact portable dispenser is required but lower-capacity countertop coolers cannot provide sufficient throughput.
Its high cooling capacity makes it particularly suitable for:
- Festivals
- Mobile bars
- Weddings
- Sporting events
- Brewery events
- Corporate hospitality
- Temporary bars
- High-volume event dispense
Key Features
- Lindr 155K Draught Beer Dispenser
- High-capacity dry beer cooler
- Maximum output up to 180 L/hour
- Twin-tap configuration
- Serves up to two compatible products
- Integrated air compressor
- Dry cooling technology
- Compensator beer taps
- Adjustable flow control
- Removable drip tray
- Portable self-contained design
- Suitable for professional event dispense
- 12-month warranty
Up to 180 Litres Per Hour
The Lindr 155K has a maximum dispense capacity of approximately:
180 litres per hour
This makes it suitable for higher-volume applications where fast draught service is required.
Actual output will depend on factors including incoming product temperature, selected serving temperature, ambient temperature and the pattern of dispense.
Twin Tap Draught Dispenser
Two dispense points allow the Lindr 155K to serve two compatible kegged products from one cooling unit.
Depending on the dispense setup, this could include:
- Two beers
- Beer and cider
- Two ciders
- Other compatible kegged drinks
Each tap incorporates adjustable flow control to help balance the pour rate at the dispense point.
Built-In Air Compressor
The Lindr 155K incorporates an air compressor, allowing compressed air to provide the driving pressure for compatible keg systems.
This can be particularly useful with KeyKeg and compatible bag-type keg systems, where the driving air remains separated from the beverage.
The integrated compressor can remove the need for a separate external air compressor in these applications.
Important – Air Compressor & Beverage Gas
The built-in compressor produces compressed air. It does not replace CO2, nitrogen or mixed beverage gas for every keg system.
Conventional steel beer kegs will normally require the appropriate external beverage gas and regulator according to the brewery's dispense requirements.
Always check the correct dispense method and operating pressure for the keg being connected.
Dry Cooling Technology
The Lindr 155K uses dry cooling technology, meaning there is no conventional water tank or ice bank to fill before operation.
This makes the unit particularly suitable for temporary and mobile installations where equipment needs to be transported, set up and removed regularly.
Compensator Beer Taps
The dispenser is fitted with compensator taps that provide adjustable flow control at the point of dispense.
This allows the pour rate to be adjusted to suit the connected product and dispense setup.
Correct product temperature, keg pressure and beer line configuration are still required for a properly balanced system.
Supplied With
The dispenser includes:
- Lindr 155K cooling unit
- Two dispense taps
- Integrated air compressor
- Drip tray
Keg couplers, product pipe, gas or air pipe and other connecting equipment are not included unless specifically stated.
Suitable For
The Lindr 155K is particularly suited to:
- High-volume mobile bars
- Festivals
- Outdoor events
- Weddings
- Sporting events
- Brewery taprooms
- Beer festivals
- Corporate hospitality
- Pop-up bars
- Temporary draught installations
- Event hire companies
Technical Specifications
- Model: Lindr 155K
- Maximum Capacity: Up to 180 L/hour
- Number of Taps: 2
- Cooling Type: Dry cooling
- Compressor: Integrated air compressor
- Weight: Approx. 45.2kg
- Flow Control: Compensator taps
- Warranty: 12 months
What Else Will I Need?
The additional equipment required depends on the keg system being connected and may include:
- Appropriate keg couplers
- Beer or product pipe
- Air or gas pipe
- Push-fit fittings
- External CO2 or mixed gas regulator where required
Always confirm the keg connection, dispense gas and recommended operating pressure before selecting the associated equipment.
