Lindr 20K Pygmy Draught Beer Dispenser – Portable Beer Cooler with Compressor
The Lindr 20K Pygmy Draught Beer Dispenser is a compact single-tap dry cooler capable of dispensing up to 20 litres of chilled beer or other compatible draught drinks per hour.
Featuring an integrated air compressor, the Lindr 20K is particularly useful with compatible keg systems where compressed air can be used as the driving pressure. Its compact size makes it ideal for home bars, parties, small events, brewery taprooms and portable draught dispense applications.
The dry cooling system requires no water bath or ice bank, providing a straightforward portable solution for serving chilled draught drinks from keg.
Lindr Pygmy 20K Portable Beer Dispenser
The Lindr Pygmy 20K combines a dry beer cooler, dispense tap and air compressor within a single compact unit.
Simply connect the appropriate keg, coupler and product pipework, switch the dispenser on and allow the cooling system to reach operating temperature.
The unit can then chill the product as it passes through the internal cooling system before it reaches the tap.
Key Features
- Lindr Pygmy 20K Beer Dispenser
- Single draught beer tap
- Up to 20 litres per hour cooling capacity
- Integrated air compressor
- Dry cooling technology
- No water bath required
- Compact portable design
- Compensator beer tap
- Removable drip tray
- Suitable for compatible beer and cider
- Ideal for home bars and smaller events
- Suitable for portable and temporary dispense
- 12-month warranty
Cooling Capacity
The Lindr 20K has a rated dispense capacity of approximately:
20 litres per hour
Actual performance will depend on factors including the incoming product temperature, required serving temperature, ambient conditions and operating environment.
Built-In Air Compressor
The 20K version incorporates an internal air compressor, removing the need for a separate external compressor where compressed air is suitable for the keg system being used.
This makes the dispenser particularly useful with compatible KeyKeg and bag-type keg systems, where the driving air remains separated from the beverage.
For conventional steel kegs, beer is normally dispensed using the appropriate CO2 or mixed beverage gas rather than compressed air if the product is to remain connected for an extended period.
Always follow the brewery or beverage supplier's recommended gas and dispense requirements.
Dry Cooling Technology
Unlike a conventional remote beer cooler, the Lindr Pygmy uses a dry cooling system.
There is no water tank to fill and no ice bank to build. This makes the unit easier to transport, set up and pack away for temporary dispense applications.
Supplied With
The dispenser includes:
- Lindr Pygmy 20K dispenser
- Compensator beer tap
- Drip tray
- Integrated air compressor
- Operating instructions
Keg couplers, beer pipe, additional fittings and other dispense equipment are not included unless specifically stated.
Suitable For
Common applications include:
- Home bars
- Parties
- Small events
- Mobile bars
- Brewery taprooms
- Beer festivals
- Temporary draught installations
- Hospitality events
- Keg beer dispense
- Portable draught beer systems
Technical Specifications
- Model: Lindr Pygmy 20K
- Cooling Capacity: Up to 20 L/hour
- Number of Taps: 1
- Cooling Type: Dry cooling
- Compressor: Integrated
- Voltage: 230V
- Frequency: 50Hz
- Running Current: 1.45A
- Power Consumption: 334W
- Refrigerant: R134a
- Weight: 16.4kg
- Width: 170mm
- Depth: 280mm
- Height: 325mm
Compact Portable Beer Cooler
With a footprint of approximately 170mm wide x 280mm deep, the Pygmy 20K takes up relatively little bar or counter space.
At 16.4kg, it can also be moved between locations more easily than a conventional remote beer cooler and permanent font installation.
What Else Will I Need?
The exact equipment required depends on the keg being connected, but a typical setup may also require:
- Appropriate keg coupler
- Beer pipe
- Gas or air pipe
- Push-fit fittings
- Beverage gas regulator where bottled gas is required
Always confirm the keg valve type and recommended dispense gas with your keg or beer supplier before selecting the connecting equipment.
Important
The built-in compressor provides compressed air. It does not replace CO2 or mixed beverage gas in every keg installation.
Compressed air should only be used where appropriate for the keg and beverage system being connected.
Need kegs? Buy Beer Kegs Here!
