Lindr 40K Draught Beer Dispenser – Twin Tap Beer Cooler with Air Compressor

Lindr 40K Draught Beer Dispenser – Twin Tap Beer Cooler with Built-In Air Compressor

The Lindr 40K Draught Beer Dispenser is a compact twin-tap dry beer cooler with an integrated air compressor, designed for portable and temporary draught drinks dispense.

With a continuous cooling capacity of approximately 35–40 litres per hour and a maximum output of up to 50 litres per hour, the Lindr 40K is suitable for parties, events, mobile bars, brewery taprooms and other applications where a compact twin-product draught system is required.

The built-in compressor can provide dispense pressure for compatible keg systems, while the dry cooling technology means there is no water tank or ice bank to fill before use.

Lindr 40K Twin Tap Beer Dispenser

The Lindr 40K features two dispense taps, allowing two different compatible draught products to be connected and served from the same machine.

This makes it a useful portable solution for serving combinations such as:

• Two different beers
• Beer and cider
• Two different ciders
• Other compatible kegged drinks

Each tap incorporates adjustable flow control to allow the pour rate to be adjusted at the dispense point.

Key Features

• Lindr 40K Draught Beer Dispenser
• Twin-tap design
• Serves up to two products
• 35–40 litres per hour continuous cooling capacity
• Maximum output up to 50 litres per hour
• Integrated air compressor
• Dry cooling technology
• No water bath required
• Adjustable thermostat
• Compensator taps with flow control
• Carry handles for easier transportation
• Stable support feet
• Compact countertop design
• Suitable for portable and temporary draught dispense

Built-In Air Compressor

The Lindr 40K incorporates its own air compressor, allowing compressed air to provide the driving pressure where this is appropriate for the keg system being used.

This is particularly useful with compatible KeyKeg and bag-type keg systems, where the compressed driving air remains separated from the beverage.

For conventional steel beer kegs, the appropriate CO2 or mixed beverage gas may still be required.

Always check the recommended dispense method and pressure with the brewery or keg supplier.

Dry Cooling Technology

The Lindr 40K uses a dry cooling system, meaning there is no water bath to fill and no ice bank to build before dispensing.

Product passes through the internal cooling system before reaching the taps, allowing the dispenser to be set up considerably more easily than a traditional remote beer cooler and font installation.

Cooling Capacity

The Lindr 40K provides approximately:

• Continuous Output: 35–40 L/hour
• Maximum Output: Up to 50 L/hour

Actual dispense capacity will depend on the incoming product temperature, selected serving temperature, ambient temperature and operating conditions.

Twin Compensator Beer Taps

Both dispense points are fitted with compensator taps featuring adjustable flow control.

This allows the flow rate to be adjusted at the tap to suit the dispense setup.

Correct keg pressure, product temperature and beer line configuration are still important for achieving a properly balanced draught system.

Temperature Control

An adjustable thermostat allows the cooling temperature to be set to suit the product and dispense requirements.

Actual serving temperature will depend on the product entering the cooler, dispense rate and surrounding conditions.

Easy to Transport

Integrated carrying handles make the Lindr 40K suitable for applications where the dispenser needs to be regularly transported, installed and removed.

This makes it particularly useful for:

• Mobile bars
• Private parties
• Weddings
• Festivals and events
• Brewery events
• Pop-up bars
• Temporary draught installations
• Home bars

Suitable For

The Lindr 40K can be used with compatible:

• Draught beer
• Cider
• Kegged drinks
• KeyKegs
• Bag-type Polykegs
• Conventional steel kegs when used with the appropriate dispense gas and equipment

Technical Specifications

• Model: Lindr 40K
• Number of Taps: 2
• Continuous Cooling Capacity: 35–40 L/hour
• Maximum Cooling Capacity: Up to 50 L/hour
• Cooling Type: Dry cooling
• Compressor: Integrated air compressor
• Voltage: 220V
• Power Consumption: 501W
• Weight: Approx. 30kg
• Refrigerant: R134a
• Pressure Control: Profi gauge
• Temperature Control: Adjustable thermostat

What Else Will I Need?

The exact equipment required will depend on the kegs being connected. A typical installation may require:

• Correct keg couplers
• 3/8" beer pipe
• Air or gas pipe
• Push-fit fittings
• Gas regulator where bottled beverage gas is required

The correct coupler and dispense gas will depend on the keg and beverage being served.

Important

The integrated compressor supplies compressed air and does not replace CO2 or mixed beverage gas for every keg system.

Compressed air should only be used where suitable for the keg and beverage being connected. For conventional steel kegs, follow the brewery's recommended dispense gas and pressure.

Need kegs? Buy Beer Kegs Here!